4 Stages in 35 Minutes
Decontamination, washing, thermal disinfection & drying are all performed in a single, automatic process.
One cycle that helps to eliminate risk to the operator and efficiently completes the phases that precede instrument packaging and sterilisation.
Crucial tools for any dentist, these instruments also represent one of the biggest cross-contamination risks. When one of these rotating devices slows down or stops, back-siphoning effects can suck liquids inside the handpiece, hence the need to perform cleaning. Instruments cannot be sterilised without thorough cleaning being performed first. Disinfection, and equally important, lubrication, should happen after each use. This procedure is also essential for maintaining instrument quality.
A poorly maintained handpiece is often subject to breakdowns and accelerated wear.
Decontamination
The instruments are placed in baskets without requiring any rinsing. A prewash with a rotor at low temperatures eliminates residues and avoids the risk of proteins fixing to the instruments in the successive high temperature treatment.
Thermal Disinfection
Tethys H10+ is a professional device provided with a 90°C thermal disinfection process according to
EN ISO 15883-1/2. Thanks to the heating action, the elimination of microorganisms through a validated process is guaranteed.
Integrated
decalcification system
Tethys H10+ is the only device of its category that offers an integrated decalcification system with ion exchange resins. The model’s exceptional functionality prevents the accumulation of limestone and other impurities within the water circuit.
The decalcificators’ maintenance was designed to respond to the criteria of simplicity and practicality, through the addition of simple kitchen or dishwasher salt.
Washing
Tethys H10+ washing is enhanced by the strength of ultrasound, allowing the removal of any adhering traces.
Cycle traceability
Tethys H10+ is equipped with an internal memory that is able to record all data from operating cycles, directly in pdf format.
Thanks to the USB port at the rear of the machine, users can download machine cycle reports. An indispensable tool for process traceability.
Hot Air Drying
After the disinfection phase, the vapours and humidity present in the tank are eliminated thanks to a forced-draught drying phase that is purified with an integrated HEPA filter. At the end of the process, the instruments are ready for the subsequent packaging phase.
"Touch" Generation
A colour LCD “touch” screen and multi-language icon menu allows a clear and intuitive selection of commands, completely customisable based on professional needs.
The desired program only needs to be chosen, and the cycle will proceed in complete autonomy.
The best performance
in a simple and fast work-flow
